# WAI Extension: Cue Injection

> Status: Draft. Registers the record `wai.live.injection`: SCTE 104 automation, translated
> to SCTE 35 sections and signed as a room's `cue` events. A broadcast automation system
> drives its injector over the API SCTE 104 defines; here the injector is a WAI ingest
> gateway. It answers each request as that standard says, builds the SCTE 35 section the
> request asks for, derives the cue the room's ad breaks are made of
> ([live-events](live-events.md) §4.3, [live-ads](live-ads.md) §4.3), and signs that cue, by
> its own principal, when the splice comes on the room clock. Before each cue its chain
> holds the cue's **injection record**, `WIJ1`: the SCTE 104 message whole, when it arrived,
> and the parameters it was translated with, so that a verifier recomputes the cue, its
> section and its instant from the record alone. No new transport, and nothing in the cue's
> layout changes: the record rides in the `meta` kind. The reference implementation is the
> `scte` module of `joule-moq-ingest` in `joule-code/joule-code-rs/crates/`; the corpus is
> [`live-conformance/injection/`](../live-conformance/injection/), and its second
> implementation is `live-conformance/injection_verify.py`.
> Keywords **MUST**, **MUST NOT**, **SHOULD**, **MAY** are RFC 2119/8174.
>
> Texts read for this revision: ANSI/SCTE 104 2023 (its §7, §8, §9, §12, §14 and Appendix
> A to C); ANSI/SCTE 35-1 2023r2 (its §9.6 to §9.9, §10.2 and §10.3, and the sample
> messages of §14). SMPTE ST 2010, which carries SCTE 104 messages in a video signal's
> vertical ancillary data, and SMPTE EG 40, which SCTE 104 names for frame-time arithmetic,
> were not available to this revision (§5.6, §10). A section number of one of these texts is
> that revision's.

## 1. Scope

In scope: the injector's API connection and its responses (§3); the messages it takes, their
checks, and when their requests are processed (§4); the SCTE 35 section each request builds
(§5); the cues a request yields, and what it withdraws (§6); the injection record, the
order in which an injector signs, and the rules it holds its own chain to (§7); how a
verifier checks an injector's chain (§8); the reasons (§9); and the carriage of SCTE 104 in
a video signal, as a mapping note (§10).

Out of scope: a transport (SCTE 104 runs over TCP, Appendix A there); the PAMS interface of
SCTE 104 §10 and §11, which provisions injectors and is not an automation system's; the
splicing of SCTE 35 downstream; ad decisions, which [live-ads](live-ads.md) §7 makes; and
the SCTE 35-2 event-based signalling a cue's form 2 carries, which no SCTE 104 request
builds.

Relationship to the core spec: `wai.live.injection` is a **record** ([SPEC](../SPEC.md) §5):
a signed record a WAI tool emits and verifies. It names no payload format and is not
dispatchable. Relationship to [live-events](live-events.md): this extension changes nothing
in it. A cue is a `cue` event as it is, of form 1 or 0 (§4.3 there); the injection record is
the payload of a `meta` event (§4.2 there), bound to its cue by the chain, as live-ads §4.2
binds a break annotation and [timed-text](timed-text.md) binds a caption's annotation.
Relationship to [live-ads](live-ads.md): an injector's cues are breaks as any other
principal's are; this extension makes their timing and their SCTE 35 messages recomputable
from what the automation system sent.

## 2. Terms

- **Automation system (AS)**, **injector**, **API connection**, **request**, **response**:
  SCTE 104's terms (§5.2 and §8.1 there). An injector here is a gateway with a principal of
  the room and a grant that permits `cue` and `meta` (live-rooms §4.1).
- **Message**: one `multiple_operation_message()` (SCTE 104 §8.2.3), or one
  `single_operation_message()` (§8.2.2).
- **Normal request**, **Supplemental request**: as SCTE 104 §8.3.1 classes the requests of
  its Table 8-4. A **group** is a Normal request and the Supplemental requests after it.
- **Room clock**, **principal**, **chain**, **cue**: as in live-events §2 and §4.3. A cue's
  **type** is out (1), in (2), chapter (3) or break (4).
- **Splice instant**: the room-clock instant, µs, a request's splice is for (§5.3, §5.4).
- **Translation**: the function of §4 to §6 from a message, the instant it arrived and the
  parameters (§4.2) to its requests' sections, cues and withdrawals.

Integers of the SCTE 104 and SCTE 35 bit streams are big-endian, as those standards write
them; integers of the injection record are little-endian, as live-events' are. A digest is
SHA-256 (FIPS 180-4).

## 3. The API connection

An injector listens for API connections on TCP, at port 5167 unless it is configured
otherwise (SCTE 104 §9.1, Appendix A). Each message on a connection begins with its opID, or
0xFFFF, and its `messageSize`, the size of the whole message: a reader takes four bytes, then
the rest of `messageSize`.

- **Initialisation.** The first message of a connection is an `init_request`. The injector
  answers it with an `init_response`, result 100 (Successful Response), protocol version 0.
  While another connection holds the injector initialised and open, an `init_request` is
  answered result 110 (Injector is already in use), and the injector takes nothing more from
  it. A `multiple_operation_message()` that arrives before `init_request` is answered with an
  `inject_response` of result 124 (`not_initialized`).
- **Alive.** An `alive_request` on an initialised connection is answered with an
  `alive_response`, result 100, carrying the injector's `time()` (SCTE 104 §12.4: seconds since
  1980-01-06T00:00:00Z with the leap seconds of §4.2 counted, and µs); on another, result 124.
- **Requests.** A `multiple_operation_message()` is answered with one `inject_response`
  (SCTE 104 §9.6.2): its `message_number`, and the result of §4 to §7: 100, 122 where §5.3
  issues a splice whose pre-roll was too small, or the result code of the refusal (§9). Every
  response echoes the request's `AS_index`, `message_number` and `DPI_PID_index`, with
  `protocol_version` 0 and `result_extension` 0xFFFF but where §4.3 names the opID at fault.
- **Completion.** When the last cue a message yields has been signed or dropped (§7.3), and
  at least one was signed, the injector sends one `inject_complete_response` (SCTE 104
  §9.6.3) whose `cue_message_count` is the number of cues signed for it. A message that yields
  no cue is completed by its `inject_response` alone, as SCTE 104 §9.6.3 has a Normal request
  that issues no section completed.
- **Order.** A request's `inject_response` precedes its `inject_complete_response`.
- **Others.** A `general_response` and the user-defined opIDs 0x0005 and 0x0006 are not
  answered. Another `single_operation_message()` opID is answered with a `general_response`
  of result 125 whose `result_extension` is the opID.
- **DPI_PID_index.** An injector configured with the values it serves answers a message of
  another value result 126 (`dpi_pid_unknown`).

## 4. Requests

### 4.1 The message

A `multiple_operation_message()` (SCTE 104 Table 8-2) is read in its order, and refused at
the first of these that holds:

1. `Reserved` is not 0xFFFF: it is a `single_operation_message()` (§3).
2. `messageSize` is not the message's size, a field runs past the message, or bytes follow
   its last request: `message_size` (114).
3. `protocol_version` or `SCTE35_protocol_version` is not 0: `version_unsupported` (127).
4. `timestamp()`'s `time_type` is not 0 or 1: `time_type_unsupported` (123). A `time_type` 1
   whose instant precedes the room's `t0` is `timestamp_before_room` (115).
5. `num_ops` is 0: `no_operation` (115).
6. The requests do not group (§4.3): `supplemental_first` (115), `operation_unsupported`
   (124) or `opid_unknown` (125).
7. A request's data does not read as §5 reads it, or holds a value §5 does not allow: the
   reason §5 names.
8. The message yields more than 255 cues: `too_many_cues` (115).

A message refused yields nothing: no section, no cue, no withdrawal.

### 4.2 When its requests are processed

The **processing instant** `P` of a message, on the room clock, is:

- `time_type` 0: the instant its last byte arrived, `R` (SCTE 104 §8.2.3.4: "all Normal
  request timing is relative to the arrival time of the last byte of the message");
- `time_type` 1: the UTC instant its `UTC_seconds` and `UTC_microseconds` state, less the
  room's `t0`; where that instant has passed when the message arrives, `R`. `UTC_seconds`
  counts from 1980-01-06T00:00:00Z with the intervening leap seconds included (§12.5.1), so
  its Unix instant is (`UTC_seconds` + 315 964 800 − `leap`) s, where `leap` is the leap
  seconds the injector is configured with (18 since 2017-01-01); `UTC_microseconds` holds the
  most significant 16 bits of the µs, so its µs are the field shifted left by 8.

A VITC timestamp (`time_type` 2) and a GPI (3) need a video signal's time code and a contact
closure, which a gateway that takes compressed contribution does not have; they are refused
(§4.1 step 4).

The **parameters** of a translation are the room's `t0`, `leap`, and the frame rate
`fps_num`/`fps_den` that §5.6's `duration_extension_frames` is counted in.

### 4.3 Groups

The requests of a message, in order, form groups (SCTE 104 §8.2.3.1, §8.3.1):

- a Normal request this revision implements opens a group: `splice_request_data()`
  (0x0101), `splice_null_request_data()` (0x0102), `time_signal_request_data()` (0x0104);
- a Supplemental request this revision implements joins the group before it:
  `insert_descriptor_request_data()` (0x0108), `insert_DTMF_descriptor_request_data()`
  (0x0109), `insert_avail_descriptor_request_data()` (0x010A),
  `insert_segmentation_descriptor_request_data()` (0x010B), `insert_tier_data()` (0x010F),
  `insert_time_descriptor()` (0x0110); one before any Normal request is
  `supplemental_first`;
- a request SCTE 104 defines and this revision does not implement (§4.4) is
  `operation_unsupported`, and its opID is the response's `result_extension`;
- any other opID, reserved or user-defined, is `opid_unknown`, its opID the
  `result_extension`.

### 4.4 What this revision does not implement

`inject_section_data_request()` (0x0100) carries a command image whose `pts_time` the
automation system computed on a clock of its own; the injector's program clock is the room
clock (§5.2), so the image's times cannot be held to its cue. `proprietary_command_request`
(0x010C) has no cue. Encryption (0x0107, 0x0300, 0x0301), component mode (0x0106,
deprecated by SCTE 35-1), schedules (0x0103, 0x0105, 0x010D, 0x010E), audio descriptors and
provisioning (0x0111, 0x0112) and the alternate break duration (0x0113) are not implemented.
Each is refused `operation_unsupported` (124).

## 5. Sections

### 5.1 The section

Each group builds one `splice_info_section()` (SCTE 35-1 Table 5), but a `splice_cancel`,
which builds none (§5.3):

| field | value |
|---|---|
| `table_id` | 0xFC |
| `section_syntax_indicator`, `private_indicator` | 0, 0 |
| `sap_type` | 3: not specified (SCTE 104 states no stream access point) |
| `section_length` | the bytes after it, at most 4 093; past that, `section_too_long` (115) |
| `protocol_version` | 0 |
| `encrypted_packet`, `encryption_algorithm`, `pts_adjustment` | 0, 0, 0 |
| `cw_index` | 0xFF: present and undefined in the clear (§9.6.1), as §14's samples write it |
| `tier` | the group's `insert_tier_data()`, or 0xFFF without one (SCTE 104 §8.2.3) |
| `splice_command_length` | the command's length |
| `splice_command_type` and the command | §5.3 to §5.5 |
| `descriptor_loop_length`, the descriptors | §5.6, in the order of the group's requests |
| `alignment_stuffing` | none |
| `CRC_32` | the MPEG-2 CRC (ISO/IEC 13818-1 Annex A: polynomial 0x04C11DB7, register preset to all ones, no reflection, no final inversion) over every byte before it |

Every reserved bit is 1 (SCTE 35-1's definition of reserved). A field of 1 bit that SCTE 104
carries in a byte (a flag) is 0 or 1; another value is `field_range` (115).

### 5.2 The program clock

The program's 90 kHz clock is the room clock: a splice instant `S` µs is `pts_time`
⌊`S` · 9 / 100⌋ modulo 2^33, with `pts_adjustment` 0. A device that restamps the program's
times adds its delta to `pts_adjustment`, as SCTE 35-1 §9.6.1 has it, and the cue's `t` stays
the instant on the room clock.

### 5.3 `splice_request_data()` to `splice_insert()`

`splice_request_data()` (SCTE 104 Table 9-5) is 14 bytes, or 15 with `not_an_entry_flag`;
another length is `message_size`. Its `splice_insert_type` gives the command (Table 9-7
there), `splice_event_cancel_indicator` 0:

| `splice_insert_type` | `out_of_network_indicator` | `splice_immediate_flag` | `break_duration()` | splice instant `S` |
|---|---|---|---|---|
| 1 `spliceStart_normal` | 1 | 1 where `pre_roll_time` is 0, else 0 | where `break_duration` is not 0 | `P` + `pre_roll_time` ms |
| 2 `spliceStart_immediate` | 1 | 1 | where `break_duration` is not 0 | `P` |
| 3 `spliceEnd_normal` | 0 | 1 where `pre_roll_time` is 0, else 0 | none | `P` + `pre_roll_time` ms |
| 4 `spliceEnd_immediate` | 0 | 1 | none | `P` |
| 5 `splice_cancel` | — | — | — | — |

- `splice_event_id`, `unique_program_id`, `avail_num` and `avails_expected` are copied;
  `program_splice_flag` is 1; `event_id_compliance_flag` is 1, since the injector is not told
  whether the automation system's ids keep SCTE 35-1 §9.9.3.
- `splice_time()` (Table 14 there), where the immediate flag is 0: `time_specified_flag` 1,
  `pts_time` §5.2's of `S`.
- `break_duration()` (Table 15 there): `auto_return` 1 where `auto_return_flag` is not 0,
  `duration` `break_duration` × 9 000 ticks (tenths of seconds).
- `not_an_entry_flag` is not passed (SCTE 104 §9.3.1.1).
- A `spliceStart_normal` whose `pre_roll_time` is not 0 and is below 4 000 ms (SCTE 104
  §12.3) is issued, and answered 122 (`preroll_too_small`).
- `splice_cancel` builds no section and yields no cue: it withdraws (§6.3). The automation
  system sends it before the splice it cancels (SCTE 104 §9.3.1.2); §7.3 says what the
  injector does with one that comes later.
- A `splice_insert_type` of 0 or above 5 is `splice_type` (121).

### 5.4 `time_signal_request_data()` to `time_signal()`

Two bytes, `pre-roll_time`; another length is `message_size`. The command is `time_signal()`
with `splice_time()` of `S` = `P` + `pre-roll_time` ms, `time_specified_flag` 1.

### 5.5 `splice_null_request_data()` to `splice_null()`

No data; data is `message_size`. The command is `splice_null()`, empty, and `S` is `P`.

### 5.6 Descriptors

Each Supplemental request adds what follows to its group's section, in the order of the
requests:

- **`insert_avail_descriptor_request_data()`**: `num_provider_avails`, then that many
  `provider_avail_id`s (a length of 1 + 4 × the count, or `message_size`); one
  `avail_descriptor()` (tag 0x00, length 8, `CUEI`, the id) per id, none for a count of 0.
- **`insert_DTMF_descriptor_request_data()`**: `pre-roll`, `dtmf_length` (at most 7, the
  descriptor's three-bit `dtmf_count`, or `field_range`), the characters (a length of
  2 + `dtmf_length`, or `message_size`); a `DTMF_descriptor()` (tag 0x01, `CUEI`, `preroll`,
  `dtmf_count` and five reserved bits, the characters).
- **`insert_time_descriptor()`**: 12 bytes, or `message_size`; a `time_descriptor()` (tag
  0x03, length 16, `CUEI`, `TAI_seconds`, `TAI_ns`, `UTC_offset`).
- **`insert_descriptor_request_data()`**: `descriptor_count`, then that many descriptor images,
  each a tag, a length and that many bytes, filling the request exactly (or `message_size`);
  each copied whole. An image whose tag is one SCTE 35-1 defines (0x00 to 0x04) and whose
  identifier is `CUEI` is `descriptor_image_standard` (115): SCTE 104 §9.8.5.1 has a standard
  descriptor come through its own request, and the injector derives cues from what such a
  request states, never from an image.
- **`insert_tier_data()`**: two bytes whose high nibble is 0 (or `field_range`), the
  section's `tier`; a second in one group is `field_range`.
- **`insert_segmentation_descriptor_request_data()`** (SCTE 104 Table 9-29): read through
  `segments_expected`; then one of four tails, by the bytes that remain: none; 1
  (`duration_extension_frames`); 6 (it, and `delivery_not_restricted_flag`,
  `web_delivery_allowed_flag`, `no_regional_blackout_flag`, `archive_allowed_flag`,
  `device_restrictions`); or 9 (those, and `insert_sub_segment_info`, `sub_segment_num`,
  `sub_segments_expected`); another is `message_size`. Without the delivery fields,
  `delivery_not_restricted_flag` is 1. `device_restrictions` above 3 is `field_range`. Its
  `segmentation_descriptor()` (SCTE 35-1 Table 20): tag 0x02, `CUEI`,
  `segmentation_event_id`; then, where `segmentation_event_cancel_indicator` is 1, that bit,
  `segmentation_event_id_compliance_indicator` 1 and six reserved bits, and nothing more;
  otherwise the cancel bit 0, the compliance bit 1, six reserved bits,
  `program_segmentation_flag` 1, `segmentation_duration_flag` where `duration` is not 0,
  `delivery_not_restricted_flag` and, where it is 0, the four restriction fields (where it is
  1, five reserved bits), `segmentation_duration` (40 bits) where flagged,
  `segmentation_upid_type`, `segmentation_upid_length` and the UPID, `segmentation_type_id`,
  `segment_num`, `segments_expected`, and, where `insert_sub_segment_info` is 1,
  `sub_segment_num` and `sub_segments_expected`, which SCTE 35-1 allows only for the types
  0x30, 0x32, 0x34, 0x36, 0x38, 0x3A, 0x44 and 0x46 (`field_range` for another). A
  descriptor longer than 254 bytes after its length is `descriptor_too_long` (115).
  **Duration.** `segmentation_duration` is `duration` × 90 000 ticks plus
  ⌊`duration_extension_frames` × 90 000 × `fps_den` / `fps_num`⌋: SCTE 104 §9.8.7.1 counts
  the extension in frame times, and this revision computes the frame time exactly from the
  configured rate where SCTE 104 refers the arithmetic to SMPTE EG 40, which it did not read.

### 5.7 The standard's samples

Built by §5, the request whose fields are those of SCTE 35-1 §14.1's sample (a
`time_signal()` with a Provider Placement Opportunity Start of 307 s) gives that sample's
section byte for byte, its CRC included, at the instant whose `pts_time` is the sample's; the
corpus holds it. §14.2's `splice_insert()` sample is written byte for byte by the reference's
section writer from its fields, but no `splice_request_data()` states its `break_duration`,
which is not a whole number of tenths of a second.

## 6. Cues

### 6.1 From a `splice_insert()`

- `spliceStart_normal` and `spliceStart_immediate`: an **out** (1) at `S`, `cue_id`
  `splice_event_id`, `duration_ms` `break_duration` × 100 (0 without one), form 1 with the
  section. Where `auto_return_flag` is not 0 and `break_duration` is not 0, a second cue
  follows it, a **derived in** (2) at `S` + `break_duration` × 100 000 µs, the same `cue_id`
  and `duration_ms`, form 0: SCTE 35's `auto_return` has the splicer return without a
  message, and the derived in states that return on the room clock. live-ads §4.3 then finds
  the break's duration equal to its in's `duration_ms`.
- `spliceEnd_normal` and `spliceEnd_immediate`: an **in** (2) at `S`, `cue_id`
  `splice_event_id`, `duration_ms` 0 (the duration is the room's to compute, live-ads §4.3),
  form 1. It withdraws the derived in of its `cue_id` (§6.3): an early return ends the break
  where the automation system says.
- `splice_cancel`: no cue (§6.3).

### 6.2 From a `time_signal()`

Each segmentation request of the group that is not cancelled yields a cue at `S`, `cue_id`
`segmentation_event_id`, form 1 with the section, by its `segmentation_type_id` (SCTE 35-1
Table 23):

| `segmentation_type_id` | cue | `duration_ms` |
|---|---|---|
| 0x22 Break Start; 0x30, 0x32 Provider and Distributor Advertisement Start; 0x34, 0x36 Provider and Distributor Placement Opportunity Start | out (1) | ⌊`segmentation_duration` / 90⌋, 0 without one |
| 0x23, 0x31, 0x33, 0x35, 0x37: their Ends | in (2) | 0 |
| 0x20 Chapter Start | chapter (3) | as for an out |
| any other | none | — |

An overlay or promotional opportunity does not replace the program, and an ad block holds
the placements that do, so neither is a break; a content, program or network boundary is not
one either. The cues of one group are its ins, then its outs, then its chapters, each in the
order of its requests: a section that ends one break and opens the next closes the first
before it opens the second. A cancelled segmentation request withdraws (§6.3). A
`splice_null()` yields no cue, nor do the segmentation descriptors of a `splice_insert()`,
whose cue is §6.1's.

### 6.3 Withdrawals

A `splice_cancel` withdraws the held cues (§7.3) of its `splice_event_id` that a splice
request yielded; a cancelled segmentation request, those of its `segmentation_event_id` that
a time signal yielded; a splice end, the held derived in of its `splice_event_id`.

### 6.4 The cue and its index

A cue is live-events §4.3's payload: `type`, `cue_id` (u32), `duration_ms` (u32), `form`, and,
for form 1, `scte_len` (u16) and the section. A message's cues, over its groups in order and
within each in §6.1's and §6.2's order, form one list; a cue's **index** is its position in it,
from 0.

## 7. The injection record and the injector's chain

### 7.1 Layout

The injection record is the payload of a `meta` event (live-events §4.2):

| offset | size | field | meaning |
|---|---|---|---|
| 0 | 4 | `magic` | `WIJ1` (ASCII) |
| 4 | 1 | `version` | 1 in this revision |
| 5 | 8 | `received` | u64: the room-clock instant, µs, the message's last byte arrived (`R`, §4.2) |
| 13 | 1 | `leap` | the leap seconds of the translation (§4.2) |
| 14 | 4 | `fps_num` | u32 |
| 18 | 4 | `fps_den` | u32, neither 0 |
| 22 | 1 | `index` | the index of the cue that follows (§6.4) |
| 23 | 2 | `message_len` | u16 |
| 25 | `message_len` | `message` | the `multiple_operation_message()`, verbatim |

The record holds nothing after `message`. The room's `t0`, the last parameter, is the room
descriptor's.

### 7.2 Signing

An injector signs each cue when the room clock reaches its splice instant, never before: a
withdrawal that comes in time then leaves nothing to undo in a signed chain. Among the cues
due at once it signs in order of instant, then of the arrival of their messages, then of
index. Each cue is two events of the injector's chain, at consecutive `seq`: its injection
record (a `meta` event), then the cue, both with `t` the cue's splice instant. An injector
takes a message's arrival instant after every instant it has signed at, so the `t` of its
chain never decreases (live-events §6.2).

A cue is signed as it was translated. The record and the cue together are at most the
principal's `max_payload` each (live-events §5); a message whose record or cue would pass it
is refused `injection_too_large` (115).

### 7.3 The injector's rules

An injector **holds** each cue a message yields until its splice instant, and keeps, for its
own chain, the room's breaks as live-ads §4.3 makes them: the open break, if any, and the end
of the last closed one. When a message is taken:

1. A message whose `message_number` is that of a message with cues still held is a repeat
   (SCTE 104 §9.3: "the Injector can detect that these are duplicates of one another by
   comparison of the `message_number` fields"); it is answered and changes nothing
   (`repeated_message`, counted).
2. Its withdrawals (§6.3) remove held cues. A `splice_cancel` or a cancelled segmentation
   request that removes none came too late, its splice already signed or never made: it is
   answered 121 (`cancel_too_late`).
3. Its cues are held. An injector holds at most its configured number of cues (256 by
   default); a message whose cues would pass it is answered 124 and changes nothing.

When a held cue's splice instant comes, in the order of §7.2, it is signed unless live-ads
§4.3 would refuse it in the injector's chain, in which case it is dropped and counted: an out
while a break is open, or before the end of the last closed one (`break_overlap`); an in with
no open break of its `cue_id` (`cue_in_unmatched`), or less than a millisecond after its out
(`break_zero_duration`). A chapter is always signed. A room with other cue authors orders its
cues by the merged order (live-rooms §9.2), which an injector does not see; it holds only its
own chain to these rules.

### 7.4 Carriage

The injector publishes its events on its principal's events track (live-rooms §6.1;
live-events §8.1), from its start, so a member can subscribe before the first cue. Each group's
first object is the join set of live-events §8.2: the out of the break open when the group
began, if one is. A relay whose door checks receipts (jwp-receipts §4.1) names the room's media
kinds in its rules, since an events track carries none.

## 8. Verification

A verifier of an injector's chain verifies each event as live-events §6 does (its signature,
`bad_signature`; its link, `chain_broken`). Then, in `seq` order, it refuses at the first of
these that holds:

1. A `meta` event whose payload begins `WIJ1` is an injection record: refused
   `injection_malformed` where it is shorter than 25 bytes, its version is not 1, a frame-rate
   field is 0, or `message_len` does not end it.
2. Its message is translated (§4 to §6) with `received`, `leap`, `fps_num`, `fps_den` and the
   room's `t0`: refused `injection_untranslatable` where the translation refuses it.
3. The next event of the chain is a `cue`: otherwise the record is refused
   `injection_unanswered`.
4. That cue's payload is the payload of the translation's cue `index`, and its `t` and the
   record's `t` are that cue's instant: otherwise the cue is refused `injection_mismatch`
   (an `index` past the translation's cues among them).
5. A `cue` of an injector's chain that does not follow its injection record is refused
   `injection_missing`. A verifier is told which principals are injectors: the room's
   configuration names them, and a cue of another principal is not held to this section.

A chain that verifies states, for each of its cues, the SCTE 104 message it came from and the
instant that message arrived, and the cue is that message's translation: a reader recomputes
the section a splicer acted on, the instant it splices at, and the break live-ads §4.3 makes
of it.

## 9. Reasons

Each refusal of a message with the SCTE 104 result code (Table 14-1 there) its response
carries, and each refusal of §8.

| reason | result | raised at |
|---|---|---|
| `not_initialized` | 124 | §3, a request before `init_request` |
| `injector_in_use` | 110 | §3, an `init_request` while another connection holds the injector |
| `dpi_pid_unknown` | 126 | §3 |
| `message_size` | 114 | §4.1 step 2; §5.3 to §5.6 |
| `version_unsupported` | 127 | §4.1 step 3 |
| `time_type_unsupported` | 123 | §4.1 step 4 |
| `timestamp_before_room` | 115 | §4.1 step 4 |
| `no_operation` | 115 | §4.1 step 5 |
| `supplemental_first` | 115 | §4.3 |
| `operation_unsupported` | 124 | §4.3, §4.4 |
| `opid_unknown` | 125 | §4.3; §3, a `single_operation_message()` of another opID |
| `too_many_cues` | 115 | §4.1 step 8 |
| `splice_type` | 121 | §5.3 |
| `preroll_too_small` | 122 | §5.3: issued, and answered so |
| `field_range` | 115 | §5.1, §5.6 |
| `descriptor_image_standard` | 115 | §5.6 |
| `descriptor_too_long` | 115 | §5.6 |
| `section_too_long` | 115 | §5.1 |
| `injection_too_large` | 115 | §7.2 |
| `repeated_message` | 100 | §7.3 step 1: counted, not refused |
| `cancel_too_late` | 121 | §7.3 step 2 |
| `break_overlap` | — | §7.3: a held cue dropped |
| `cue_in_unmatched` | — | §7.3: a held cue dropped |
| `break_zero_duration` | — | §7.3: a held cue dropped |
| `injection_malformed` | — | §8 step 1 |
| `injection_untranslatable` | — | §8 step 2 |
| `injection_unanswered` | — | §8 step 3 |
| `injection_mismatch` | — | §8 step 4 |
| `injection_missing` | — | §8 step 5 |
| `bad_signature`, `chain_broken` | — | §8, live-events §6 |

## 10. Carriage in a video signal (mapping)

SCTE 104 §7.2 carries the same messages within a serial digital video signal's vertical
ancillary data, by SMPTE ST 2010, and SCTE 104 Appendix C has a receiving injector process
each message and remove it from the video. This revision maps that carriage and implements
none of it:

- **Where it meets this injector.** A contribution that keeps the ancillary data of its
  source carries ST 2010's packets beside the compressed video; an ingest path that reads them
  hands each message it reassembles to §4 as an API connection would, with `R` the room-clock
  time of the video frame whose ancillary data completed it, which live-ingest §7 maps. The Enhanced RTMP and WHIP ingests of live-ingest carry compressed
  video alone, so none of their paths has ST 2010 data to read.
- **One-way carriage.** In a video signal no response returns (SCTE 104 §7.4, §13.1): the
  injector answers nothing, and a message the automation system repeats for safety is a repeat
  of §7.3 step 1.
- **Deferred processing.** SCTE 104 §7.5 has a proxy device replace a message's
  `timestamp()` with a `time_type` of 0 when it places the message in the video at its
  triggering frame; such a message is processed at `R` (§4.2).
- **What is not read.** ST 2010's packet layout, its fragmentation of a message across
  packets, and its interaction with SMPTE ST 2038's carriage of ancillary data in an MPEG
  transport stream were not available to this revision.

## 11. Status and conformance

| part | status | where |
|---|---|---|
| the API connection (§3) | implemented | `joule-moq-ingest` `scte`: init, alive, one connection at a time, responses and completions |
| translation (§4 to §6) | implemented | `scte::scte104`, `scte::scte35` |
| the injection record, signing, the rules (§7) | implemented | `scte::Engine`, `scte::Injector` |
| verification (§8) | implemented | `injection_verify.py`; the reference's tests |
| carriage in a video signal (§10) | specified | — |

The corpus ([`live-conformance/injection/`](../live-conformance/injection/vectors.json)) is
generated through the reference's own code paths from fixed seeds and regenerates byte for
byte (`tests/conformance_corpus.rs`): translations of every request and descriptor this
revision implements, the standard's sample (§5.7) among them; every refusal of §4 and §5 with
its result code; scenarios of messages on a clock with the chain the injector signs for them,
the breaks live-ads §4.3 makes of it, and what was dropped; and chains §8 refuses, each at its
event with its reason. `injection_verify.py`, written from this text and sharing no code with
the reference, translates every message, runs §7.3 over every scenario, verifies every chain
and derives its breaks, and agrees with the corpus on every vector. The reference's
end-to-end test (`tests/scte104_injection.rs`) drives an injector over TCP with an automation
system of its own, and a subscriber at a relay reads the chain from the events track.

## 12. Security and privacy considerations

- An API connection has no authentication of its own (SCTE 104 relies on the facility's
  network). An injector listens on loopback by default; a deployment puts it on the
  automation network alone, or behind a TLS tunnel whose client certificate names the
  automation system.
- The injector signs what the automation system asked for, with its own key: its chain is the
  injector's statement of what it was sent and when, not the automation system's, which signs
  nothing. A reader that trusts an injector's cues trusts that key, as a reader of an ingest's
  receipts trusts the first hop's (live-ingest §18).
- Signing at the splice instant means a cancelled splice leaves no event, and a reader of the
  chain sees only the splices that happened. The cost is notice: a player learns of a break
  when it begins, not at the automation system's pre-roll.
- A message's bytes are untrusted data: every field is bounded by the message's size and read
  only as §4 to §6 read it, and a descriptor image is copied, never interpreted.