{
  "_meta": {
    "locale": "zh-CN",
    "area": "workbench",
    "translation": "machine-assisted: to be reviewed by a fluent reader before it is advertised"
  },
  "workbench.measure_depth": "深度",
  "workbench.measure_two_qubit": "双量子比特门",
  "workbench.measure_t_count": "T 门",
  "workbench.measure_gates": "门",
  "workbench.measure_two_qubit_depth": "双量子比特门深度",
  "workbench.measure_one_qubit": "单量子比特门",
  "workbench.measure_three_qubit": "三量子比特门",
  "workbench.measure_non_clifford": "非 Clifford 门",
  "workbench.measure_qubits": "量子比特",
  "workbench.sizes_name_each": "请为每个输入写出名称：{list}",
  "workbench.sizes_no_input": "程序没有输入 {name}；它的输入是 {names}",
  "workbench.sizes_whole": "{name}：须为 0 或更大的整数，例如 {name} = 3, 5, 8",
  "workbench.sizes_missing": "请给出 {names} 的取值",
  "workbench.cost_needs_weight": "请至少为代价中的一项度量设置大于 0 的权重",
  "workbench.map_label": "存档：按{x}和{y}划分的 {n} 个单元",
  "workbench.point_label": "{id}，由 {proposer} 提出：代价 {cost}，{x} 和 {y}",
  "workbench.point_title": "{id}（{proposer}）：代价 {cost}",
  "workbench.outcome_duplicate": "{who}：之前已见过，不再重复评估",
  "workbench.outcome_not_verified": "{who}：未通过验证：{failure}",
  "workbench.outcome_did_not_read": "无法读取",
  "workbench.outcome_improvement": "{who}：已保留为 {id}，比此前的每个生成器都更便宜（代价 {cost}）",
  "workbench.outcome_kept": "{who}：已保留为 {id}，是其单元中最好的（代价 {cost}）",
  "workbench.outcome_verified": "{who}：已验证（代价 {cost}），但它的单元中已有一个同样便宜的",
  "workbench.start": "开始",
  "workbench.start_title": "新建一个存档，以编辑器中的程序作为参照",
  "workbench.task_label": "每个成员必须做到什么",
  "workbench.task_prepares": "从 |0…0⟩ 制备出相同的态",
  "workbench.task_equivalent": "是同一条线路（酉矩阵相同）",
  "workbench.sizes_label": "要检查的规模",
  "workbench.gates_any": "任意",
  "workbench.gates_label": "建议可以使用的门",
  "workbench.conn_label": "门可以连接哪些量子比特",
  "workbench.conn_all": "任意一对",
  "workbench.conn_line": "一条直线上的相邻量子比特",
  "workbench.weight_label": "代价中{measure}的权重",
  "workbench.axis_first": "图的第一个轴",
  "workbench.axis_second": "图的第二个轴",
  "workbench.spec": "规格",
  "workbench.each_member_must": "每个成员必须",
  "workbench.checked_at": "检查的规模",
  "workbench.using": "使用的门",
  "workbench.on": "连接方式",
  "workbench.cost_summed": "代价（对各规模求和）：",
  "workbench.map": "图",
  "workbench.against": "对",
  "workbench.search": "搜索 ×100",
  "workbench.search_title": "内置的盲搜索：对存档中最好的生成器做一百次带种子的编辑，每次都由引擎检查",
  "workbench.ask": "询问模型 ×3",
  "workbench.ask_title": "以存档中最好的生成器为起点，由模型给出三个生成器；引擎逐一判定",
  "workbench.submit": "提交编辑器中的程序",
  "workbench.submit_title": "判定编辑器中的程序，若它是其单元中最好的则保留",
  "workbench.download": "下载",
  "workbench.download_title": "规格及其存档，每个保留的生成器都附有带封签的判定，供 wai-quantum discover verify 使用",
  "workbench.intro": "在编辑器中写一个生成器（一个带有 input uint n; 的程序），说明其族中每个成员必须做到什么、代价如何，然后开始。没有输入的程序也可以：一条线路，一个规模。",
  "workbench.title": "工作台",
  "workbench.stats_energy": "，{joules} J",
  "workbench.improvement_one": "{n} 次改进",
  "workbench.improvement_many": "{n} 次改进",
  "workbench.stats": "已评估 {evaluations} 个，已验证 {verified} 个，保留 {kept} 个，{improvements}{energy}。",
  "workbench.stats_best": "最好的是 {id}：代价 {cost}，参照的代价为 {reference}；由 {proposer} 提出，以 {strength} 检查。",
  "workbench.open": "在编辑器中打开",
  "workbench.entry_title": "{id} · 代价 {cost} · {x_measure} {x_value}，{y_measure} {y_value}",
  "workbench.checked_by": "以 {strength} 检查{sealed}",
  "workbench.sealed": "，已封签",
  "workbench.lineage": "它的来历",
  "workbench.its_generator": "它的生成器",
  "workbench.checking_reference": "引擎正在每个规模上检查参照…",
  "workbench.started": "已开始：参照是 {id}，代价 {cost}。",
  "workbench.loosened": "规格现在{change}。这个存档是在旧规则下建立的；要按新规则搜索，请新建一个存档。",
  "workbench.loosened_allows": "允许使用 {gate}",
  "workbench.loosened_any_pair": "允许门连接任意一对量子比特",
  "workbench.novelty_said": "{id}：{text}。",
  "workbench.aberration_uses": "它使用了 {gate}",
  "workbench.aberration_joins": "它连接了不相邻的量子比特",
  "workbench.aberration_breaks": "它违反了一条规则",
  "workbench.aberration_why": "它只违反了一条规则（{rule}）；若没有这条规则，它会以代价 {cost} 通过验证（{strength}），{x_measure} {x_value}，{y_measure} {y_value}。",
  "workbench.try_without": "去掉这条规则再试",
  "workbench.aberration_said": "{who}：一个异常。{why}这条规则也许值得修改。",
  "workbench.search_progress": "盲搜索：{total} 次编辑中已判定 {done} 次…",
  "workbench.search_done": "盲搜索：判定了 {total} 次编辑，保留 {kept} 个。",
  "workbench.search_find_said": "{id}（盲搜索）：{text}。",
  "workbench.search_find_title": "{id}（盲搜索）：{text}",
  "workbench.search_stopped": "搜索已停止：{error}",
  "workbench.paused": "你正在独自探索：模型会等到你在“版本”下结束独自探索。",
  "workbench.needs_model": "“询问模型”需要一个模型：请在“助手”的“模型…”下连接一个。",
  "workbench.model_proposing": "模型正在提出建议；引擎将逐一判定…",
  "workbench.model_wrote_none": "模型没有在 ```qasm 代码块中写出任何生成器。",
  "workbench.an_idea": "一个想法",
  "workbench.model_failed": "模型没有回答：{error}",
  "workbench.your_program": "你的程序",
  "workbench.not_judged": "无法判定：{error}",
  "workbench.saved": "已保存 {path} 及其存档；wai-quantum discover verify {stem}.json 会检查每个封签。",
  "workbench.not_saved": "无法保存：{error}",
  "workbench.resumed": "已接续：迄今已评估 {n} 个。"
}