2257b320fc
A run on one of the person's providers waited inside the desktop app for up to two hours, holding the Studio, and then cancelled the job, giving up its place in a device's queue. The app now writes the job down before it sends it, with the command line's records of jobs on a provider (#581), and asks after it by its id. - wai-quantum-desktop: run_on_provider answers within ten seconds, done or still running with its id; provider_job asks after a job once or cancels it; provider_jobs lists the jobs sent, asking no provider. - Quantum Studio: while a job waits, Cancel cancels it at the provider and "Wait in the background" leaves it there and frees the Studio. A job left waiting, from this window or an earlier one, is followed while the app is open, and its result goes to the history when it finishes. Your jobs lists every job sent. A check that fails during the wait does not end it. - The tests: the app's queued job answered by its id, sealed with the app's key, the same answer after, and cancelled only when asked; the page's wait, cancel, cancel-after-finish, failed check, background and reopened window. The studio workflow names the new app test on every leg. Co-Authored-By: Claude Opus 5.5 <[email protected]>
293 lines
16 KiB
YAML
293 lines
16 KiB
YAML
name: wai-quantum studio and desktop
|
|
|
|
# Quantum Studio (wai/quantum-studio), the interface for the browser and the
|
|
# desktop, and the desktop app around it (wai/wai-quantum-desktop):
|
|
# - the Studio built against the engine's browser package (wai-web, feature
|
|
# quantum_engine) and run in a browser by test/studio.test.mjs: linted, drawn and
|
|
# planned as it is typed, run here with its receipt checked here, an error marked
|
|
# on its line, any angle on the state vector, Ctrl+Enter, and the program and the
|
|
# history kept across a reload; a device target's coupling map coloured by its
|
|
# errors, a run placed and simulated on it, and the layout drawn on the map;
|
|
# nothing scrolls sideways at a phone's width;
|
|
# - test/hardware.test.mjs, without a browser: "Your hardware" asks the person before
|
|
# a run that is not free, never before a free one, and sends nothing on a "no"; a job
|
|
# in the provider's queue is asked after by its id, Cancel cancels it there, "Wait in
|
|
# the background" leaves it, and a job left waiting gives its result when it finishes;
|
|
# - test/telemetry.test.mjs, without a browser: the correctness record is off by
|
|
# default, and while off records nothing, writes nothing and asks the engine
|
|
# nothing; and the views page agent hosts draw is built from these sources
|
|
# (build-views.mjs --check; wai-quantum-views.yml draws it);
|
|
# - in the browser, too: answer views drawn as an answer streams in, and the
|
|
# correctness record turned on and its failures exported;
|
|
# - test/locales.test.mjs, without a browser: every key of the interface's words in
|
|
# every locale, with the same placeholders, each translation marked machine-assisted;
|
|
# - the course in the browser, in English and in Chinese (studio.test.mjs): a lesson
|
|
# checked by the engine, what went wrong, a hint, a pass kept in the browser, and the
|
|
# language followed from the browser and switched;
|
|
# - test/update.test.mjs, without a browser: the desktop app's update offer names
|
|
# both versions, installs nothing until asked, and reports a refusal;
|
|
# - the desktop app on macOS, Linux and Windows: its tests and clippy with warnings
|
|
# as errors, and `check`: a job run in the app's worker process, sealed in the app
|
|
# with a key that never leaves it, and verified, with no window. The tests hold an
|
|
# update to the build's key and the version it was signed for, and say which
|
|
# copies update themselves; on Linux, the release's manifests (the Homebrew cask,
|
|
# the Scoop manifest, the update manifest) are written from releases made up here
|
|
# (release/manifests_test.py). The installers themselves are built by
|
|
# wai-quantum-desktop-release.yml, on a tag.
|
|
|
|
concurrency:
|
|
group: ${{ github.workflow }}-${{ github.ref }}
|
|
cancel-in-progress: true
|
|
|
|
on:
|
|
push:
|
|
branches: [main]
|
|
paths:
|
|
- 'wai/quantum-studio/**'
|
|
- 'wai/wai-quantum-desktop/**'
|
|
- 'wai/wai-quantum/**'
|
|
- 'wai/wai-quantum-cli/**'
|
|
- 'wai/wai-quantum-qpu/**'
|
|
- 'wai/wai-web/**'
|
|
- 'wai/wai-rs/**'
|
|
- 'wai/wai-quantum-views/**'
|
|
- 'rust-toolchain.toml'
|
|
- '.github/workflows/wai-quantum-studio.yml'
|
|
- '.github/workflows/wai-quantum-desktop-release.yml'
|
|
pull_request:
|
|
paths:
|
|
- 'wai/quantum-studio/**'
|
|
- 'wai/wai-quantum-desktop/**'
|
|
- 'wai/wai-quantum/**'
|
|
- 'wai/wai-quantum-cli/**'
|
|
- 'wai/wai-quantum-qpu/**'
|
|
- 'wai/wai-web/**'
|
|
- 'wai/wai-rs/**'
|
|
- 'wai/wai-quantum-views/**'
|
|
- 'rust-toolchain.toml'
|
|
- '.github/workflows/wai-quantum-studio.yml'
|
|
- '.github/workflows/wai-quantum-desktop-release.yml'
|
|
|
|
jobs:
|
|
relevant:
|
|
name: does this change touch it
|
|
runs-on: linux-arm64
|
|
outputs:
|
|
run: ${{ steps.gate.outputs.run }}
|
|
steps:
|
|
- uses: actions/checkout@v5
|
|
with:
|
|
fetch-depth: 0
|
|
- id: gate
|
|
run: |
|
|
set -euo pipefail
|
|
r=$(python3 scripts/pr-touches-paths.py .github/workflows/wai-quantum-studio.yml \
|
|
"${{ github.event.pull_request.base.sha }}" \
|
|
"${{ github.event.pull_request.head.sha }}")
|
|
echo "this change touches the studio or the desktop app: $r"
|
|
echo "run=$r" >> "$GITHUB_OUTPUT"
|
|
|
|
studio:
|
|
name: studio · browser
|
|
needs: relevant
|
|
if: needs.relevant.outputs.run == 'true'
|
|
runs-on: linux
|
|
timeout-minutes: 60
|
|
steps:
|
|
- uses: actions/checkout@v5
|
|
- name: Install Rust 1.98.0 with the wasm32 target
|
|
shell: bash
|
|
run: |
|
|
export PATH="$HOME/.cargo/bin:$PATH"
|
|
command -v rustup >/dev/null 2>&1 || \
|
|
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
|
|
rustup toolchain install 1.98.0 --profile minimal
|
|
rustup default 1.98.0
|
|
rustup target add wasm32-unknown-unknown
|
|
echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"
|
|
# Pinned to the wasm-bindgen version in wai-web/Cargo.lock.
|
|
- name: wasm-bindgen CLI 0.2.127
|
|
shell: bash
|
|
run: cargo install --locked wasm-bindgen-cli --version 0.2.127
|
|
- uses: actions/setup-node@v4
|
|
with:
|
|
node-version: '22'
|
|
- name: The engine's browser package
|
|
shell: bash
|
|
working-directory: wai/wai-web
|
|
run: |
|
|
set -euo pipefail
|
|
cargo build --locked --release --target wasm32-unknown-unknown --features quantum_engine
|
|
wasm-bindgen --target web --out-dir "$RUNNER_TEMP/pkg" --out-name wai_quantum_ide \
|
|
target/wasm32-unknown-unknown/release/wai_web.wasm
|
|
- name: Build the Studio and run it in a browser
|
|
shell: bash
|
|
working-directory: wai/quantum-studio
|
|
env:
|
|
WAI_E2E_CHANNEL: ''
|
|
STUDIO_SKIP_SERVICE: '1'
|
|
run: |
|
|
set -euo pipefail
|
|
npm ci --no-audit --no-fund
|
|
npx playwright install --with-deps chromium
|
|
node test/hardware.test.mjs
|
|
node test/telemetry.test.mjs
|
|
node test/update.test.mjs
|
|
node build-views.mjs --check
|
|
node test/locales.test.mjs
|
|
node build.mjs --pkg "$RUNNER_TEMP/pkg"
|
|
node test/studio.test.mjs
|
|
|
|
desktop:
|
|
name: desktop app · macos
|
|
needs: relevant
|
|
if: needs.relevant.outputs.run == 'true'
|
|
runs-on: macos
|
|
timeout-minutes: 90
|
|
steps:
|
|
- uses: actions/checkout@v5
|
|
# launchd's PATH omits cargo and node on the macOS host runner.
|
|
- name: Put cargo and node on PATH
|
|
shell: bash
|
|
run: |
|
|
echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"
|
|
echo "/opt/homebrew/bin" >> "$GITHUB_PATH"
|
|
# The app embeds the Studio's build, so it is built first.
|
|
- name: Build the Studio
|
|
shell: bash
|
|
working-directory: wai/quantum-studio
|
|
run: |
|
|
set -euo pipefail
|
|
npm ci --no-audit --no-fund
|
|
node build.mjs
|
|
- name: Tests, clippy, and a job through the worker with no window
|
|
shell: bash
|
|
working-directory: wai/wai-quantum-desktop
|
|
run: |
|
|
set -euo pipefail
|
|
nice -n 10 cargo test --locked --release 2>&1 | tee "$RUNNER_TEMP/test.log"
|
|
grep -qE '^test result: ok\. [1-9][0-9]* passed; 0 failed' "$RUNNER_TEMP/test.log" || { echo "::error::no test ran"; exit 1; }
|
|
grep -q '^test tests::a_run_on_a_provider_is_estimated_refused_until_confirmed_and_sealed_with_the_app_s_key \.\.\. ok$' "$RUNNER_TEMP/test.log" || { echo "::error::the provider run test did not run and pass"; exit 1; }
|
|
grep -q '^test tests::a_job_still_queued_is_answered_by_its_id_and_cancelled_only_when_asked \.\.\. ok$' "$RUNNER_TEMP/test.log" || { echo "::error::the queued provider job test did not run and pass"; exit 1; }
|
|
grep -q '^test tests::device_targets_are_listed_shown_and_placed_for_the_page \.\.\. ok$' "$RUNNER_TEMP/test.log" || { echo "::error::the device targets test did not run and pass"; exit 1; }
|
|
grep -q '^test tests::an_answer_is_read_run_and_sealed_for_the_page \.\.\. ok$' "$RUNNER_TEMP/test.log" || { echo "::error::the answer views test did not run and pass"; exit 1; }
|
|
grep -q '^test tests::the_course_is_read_and_checked_in_the_app \.\.\. ok$' "$RUNNER_TEMP/test.log" || { echo "::error::the course test did not run and pass"; exit 1; }
|
|
for t in a_read_only_volume_is_told_from_a_writable_one an_update_is_held_to_this_build_s_key_and_the_version_it_was_signed_for only_a_copy_installed_by_its_own_installer_updates_itself the_updater_asks_the_release_s_manifest_and_requires_a_signed_version; do
|
|
grep -q "^test tests::$t \.\.\. ok\$" "$RUNNER_TEMP/test.log" || { echo "::error::the update test $t did not run and pass"; exit 1; }
|
|
done
|
|
grep -q '^test tests::a_program_in_another_format_opens_in_the_app \.\.\. ok$' "$RUNNER_TEMP/test.log" || { echo "::error::the formats test did not run and pass"; exit 1; }
|
|
nice -n 10 cargo clippy --locked --release --all-targets -- -D warnings
|
|
nice -n 10 cargo build --locked --release
|
|
./target/release/wai-quantum-desktop check
|
|
s="$(./target/release/wai-quantum-desktop update-status)"; echo "update-status: $s"
|
|
[[ "$s" == *'"installed_by":null'* && "$s" == *'"updates_itself":false'* ]] || { echo "::error::a copy cargo built would update itself"; exit 1; }
|
|
|
|
desktop-linux:
|
|
name: desktop app · linux
|
|
needs: relevant
|
|
if: needs.relevant.outputs.run == 'true'
|
|
runs-on: linux
|
|
timeout-minutes: 90
|
|
steps:
|
|
- uses: actions/checkout@v5
|
|
- name: Install Rust 1.98.0 and the web view's libraries
|
|
shell: bash
|
|
run: |
|
|
export PATH="$HOME/.cargo/bin:$PATH"
|
|
command -v rustup >/dev/null 2>&1 || \
|
|
curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
|
|
rustup toolchain install 1.98.0 --profile minimal --component clippy
|
|
rustup default 1.98.0
|
|
SUDO=""; [ "$(id -u)" -ne 0 ] && SUDO="sudo"
|
|
$SUDO apt-get update -qq
|
|
$SUDO apt-get install -y -qq libwebkit2gtk-4.1-dev libxdo-dev libayatana-appindicator3-dev librsvg2-dev
|
|
echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"
|
|
- uses: actions/setup-node@v4
|
|
with:
|
|
node-version: '22'
|
|
- name: Build the Studio
|
|
shell: bash
|
|
working-directory: wai/quantum-studio
|
|
run: |
|
|
set -euo pipefail
|
|
npm ci --no-audit --no-fund
|
|
node build.mjs
|
|
- name: Tests, clippy, and a job through the worker with no window
|
|
shell: bash
|
|
working-directory: wai/wai-quantum-desktop
|
|
run: |
|
|
set -euo pipefail
|
|
cargo test --locked --release 2>&1 | tee "$RUNNER_TEMP/test.log"
|
|
grep -qE '^test result: ok\. [1-9][0-9]* passed; 0 failed' "$RUNNER_TEMP/test.log" || { echo "::error::no test ran"; exit 1; }
|
|
for t in a_run_on_a_provider_is_estimated_refused_until_confirmed_and_sealed_with_the_app_s_key a_job_still_queued_is_answered_by_its_id_and_cancelled_only_when_asked device_targets_are_listed_shown_and_placed_for_the_page an_answer_is_read_run_and_sealed_for_the_page the_course_is_read_and_checked_in_the_app an_update_is_held_to_this_build_s_key_and_the_version_it_was_signed_for only_a_copy_installed_by_its_own_installer_updates_itself the_updater_asks_the_release_s_manifest_and_requires_a_signed_version; do
|
|
grep -q "^test tests::$t \.\.\. ok\$" "$RUNNER_TEMP/test.log" || { echo "::error::the test $t did not run and pass"; exit 1; }
|
|
done
|
|
cargo clippy --locked --release --all-targets -- -D warnings
|
|
cargo build --locked --release
|
|
./target/release/wai-quantum-desktop check
|
|
s="$(./target/release/wai-quantum-desktop update-status)"; echo "update-status: $s"
|
|
[[ "$s" == *'"installed_by":null'* && "$s" == *'"updates_itself":false'* ]] || { echo "::error::a copy cargo built would update itself"; exit 1; }
|
|
- name: The release's manifests, from releases made up here
|
|
shell: bash
|
|
working-directory: wai/wai-quantum-desktop
|
|
run: |
|
|
set -euo pipefail
|
|
bash -n release/collect.sh
|
|
bash -n release/publish.sh
|
|
bash -n release/signing.sh
|
|
python3 -I release/manifests_test.py
|
|
|
|
desktop-windows:
|
|
name: desktop app · windows
|
|
needs: relevant
|
|
if: needs.relevant.outputs.run == 'true'
|
|
runs-on: windows
|
|
timeout-minutes: 120
|
|
steps:
|
|
- uses: actions/checkout@v5
|
|
- name: Build the Studio
|
|
shell: pwsh
|
|
working-directory: wai/quantum-studio
|
|
run: |
|
|
$ErrorActionPreference = 'Stop'
|
|
Set-ExecutionPolicy -Scope Process -ExecutionPolicy Bypass -Force
|
|
node --version
|
|
npm ci --no-audit --no-fund
|
|
if ($LASTEXITCODE -ne 0) { throw "npm ci failed" }
|
|
node build.mjs
|
|
if ($LASTEXITCODE -ne 0) { throw "the Studio's build failed" }
|
|
- name: Tests, clippy, and a job through the worker with no window
|
|
shell: pwsh
|
|
working-directory: wai/wai-quantum-desktop
|
|
run: |
|
|
$ErrorActionPreference = 'Stop'
|
|
Set-ExecutionPolicy -Scope Process -ExecutionPolicy Bypass -Force
|
|
$log = Join-Path $env:RUNNER_TEMP 'test.log'
|
|
# cargo writes its progress to stderr; the exit status is what counts.
|
|
$ErrorActionPreference = 'Continue'
|
|
cargo test --locked --release *> $log
|
|
$rc = $LASTEXITCODE
|
|
$ErrorActionPreference = 'Stop'
|
|
Get-Content $log
|
|
if ($rc -ne 0) { throw "the tests failed ($rc)" }
|
|
$text = Get-Content $log -Raw
|
|
if ($text -notmatch '(?m)^test result: ok\. [1-9][0-9]* passed; 0 failed') { throw "no test ran" }
|
|
foreach ($t in @('a_run_on_a_provider_is_estimated_refused_until_confirmed_and_sealed_with_the_app_s_key', 'a_job_still_queued_is_answered_by_its_id_and_cancelled_only_when_asked', 'device_targets_are_listed_shown_and_placed_for_the_page', 'an_answer_is_read_run_and_sealed_for_the_page', 'the_course_is_read_and_checked_in_the_app', 'an_update_is_held_to_this_build_s_key_and_the_version_it_was_signed_for', 'only_a_copy_installed_by_its_own_installer_updates_itself', 'the_updater_asks_the_release_s_manifest_and_requires_a_signed_version')) {
|
|
if ($text -notmatch ('(?m)^test tests::' + [regex]::Escape($t) + ' \.\.\. ok\r?$')) { throw "the test $t did not run and pass" }
|
|
}
|
|
# '--' quoted, so PowerShell hands it to cargo as it is.
|
|
cargo clippy --locked --release --all-targets '--' -D warnings
|
|
if ($LASTEXITCODE -ne 0) { throw "clippy failed" }
|
|
cargo build --locked --release
|
|
if ($LASTEXITCODE -ne 0) { throw "the build failed" }
|
|
# The app is a windowed program: waited for, its output kept.
|
|
$out = Join-Path $env:RUNNER_TEMP 'check.out'; $err = Join-Path $env:RUNNER_TEMP 'check.err'
|
|
$p = Start-Process -FilePath 'target\release\wai-quantum-desktop.exe' -ArgumentList 'check' -Wait -PassThru -NoNewWindow -RedirectStandardOutput $out -RedirectStandardError $err
|
|
Get-Content $out, $err
|
|
if ($p.ExitCode -ne 0) { throw "check exited $($p.ExitCode)" }
|
|
if (-not ((Get-Content $out -Raw) -match '^check: ')) { throw "check said nothing" }
|
|
# A copy cargo built knows no installer made it, so it never updates itself.
|
|
$p = Start-Process -FilePath 'target\release\wai-quantum-desktop.exe' -ArgumentList 'update-status' -Wait -PassThru -NoNewWindow -RedirectStandardOutput $out -RedirectStandardError $err
|
|
$s = Get-Content $out -Raw
|
|
Write-Output "update-status: $s"
|
|
if ($p.ExitCode -ne 0 -or $s -notmatch '"installed_by":null' -or $s -notmatch '"updates_itself":false') { throw "a copy cargo built would update itself: $s" }
|