open-standards/.github/workflows/wai-vector.yml

name: wai-vector vector graphics

# The vector graphics capability (wai/extensions/graphics-vector.md), checked on every
# fabric leg the corpus has today. Every leg recomputes every expected file of
# wai/vector-conformance/ from its vector and the committed sets, and requires the
# committed bytes:
#
#   - Linux x86_64, Linux arm64 and macOS arm64, natively, debug and release: the unit
#     tests, the refusal-order, canonical, clock, track, geometry, cost, held-set and
#     raster tests, the corpus tests (every frame of the rendering groups recomputed
#     to its SHA-256, and every text record of the a11y group recomputed byte for
#     byte), the in-house sets' tests (the default stroke set's SHA-256 is Annex B's,
#     Annex A's table is the expansion's, and both sets re-derive from their WSF1
#     sources), the text layer's tests (the projection and the transcript of section
#     5.4 against JSON written out by hand, and the worked example read from the
#     extension), and `wai-vector vectors verify`, which also regenerates the whole
#     corpus and converts every payload's authoring form back to its bytes; and the
#     sink's build, without the feature `author`, so with no stroker;
#   - WASI (wasm32-wasip2) under wasmtime, a 32-bit target: the same tests and the same
#     `vectors verify`;
#   - a browser's engine (wasm32-unknown-unknown) under Node: the recomputation of
#     every expected file and every authoring form, in a sink's build (an a11y
#     payload's expected file states the SHA-256 of its text record, so the projection
#     and the transcript are recomputed here too), and the default stroke set's
#     SHA-256 against Annex B;
#   - three browser engines (chromium, webkit and firefox, as Playwright 1.60.0 names
#     the engines it drives), in that version's container image, pinned by digest. The
#     package a site serves (the sink's exports alone, built for wasm32v1-none and read
#     back as WebAssembly 1.0 by wasm/check-mvp.mjs) loads every payload to its code,
#     states each listed size's cost, and renders the frames through the page's hook:
#     each is hashed by the module and by the platform, and the sampled ones are sent
#     to Node and hashed there. For each a11y payload the sink's transcript and its
#     projection at every frame of every listed rate, written out as the text
#     record's lines, must be the committed record byte for byte. The recomputation
#     module then recomputes every expected file and authoring form in each engine.
#     A missing engine fails the job;
#   - the fuzz leg: the corpus-seeded fuzz of the WOS1 and WVG1 parsers at depth, each
#     accepted payload of small cost rendered and each accepted payload's text layer
#     held (its transcript is JSON, and its projections list the blocks the frame
#     procedure draws), the peak-allocation test and the duplicate-detection
#     comparison count;
#   - the independent checker, tools/wai_vector_check.py: Python standard library only,
#     written from the extension text alone and sharing no code with wai-vector, which
#     recomputes every expected file byte for byte (every frame by the closed-form
#     crossings in big integers), rewrites every payload and set to its own bytes, and
#     recomputes every digest of sha256.json.
#
# There is no Windows leg: the Windows runner has been offline since 2026-08-28.

# One run per branch at a time. A push supersedes the run before it.
#
# There is one `macos` runner and it is the dev Mac, so every macOS job in this repo
# queues on it; only the newest commit's verdict is wanted, so older runs are
# cancelled. `cancel-in-progress: true` also applies to `main`, which advances by
# merge commits whose tree contains the commits before them.
concurrency:
  group: ${{ github.workflow }}-${{ github.ref }}
  cancel-in-progress: true

on:
  pull_request:
    paths:
      - 'wai/wai-vector/**'
      # SHA-256 is wai-ops's, included by #[path].
      - 'wai/wai-ops/src/sha256.rs'
      - 'wai/vector-conformance/**'
      - 'wai/tools/wai_vector_*.py'
      # The text the crate and the corpus are held to.
      - 'wai/extensions/graphics-vector.md'
      # The licence text the in-house sets carry in their notes.
      - 'LICENSE'
      - '.github/workflows/wai-vector.yml'
  push:
    branches:
      - main
    paths:
      - 'wai/wai-vector/**'
      - 'wai/wai-ops/src/sha256.rs'
      - 'wai/vector-conformance/**'
      - 'wai/tools/wai_vector_*.py'
      - 'wai/extensions/graphics-vector.md'
      - 'LICENSE'
      - '.github/workflows/wai-vector.yml'

jobs:
  # Does this pull request's own diff touch the paths below? This forge matches a
  # workflow's `paths:` against the push, so a merge of main into a branch fires the
  # workflow whatever the pull request changes; every job here waits on this answer.
  # A push to main, a schedule, or anything the script cannot determine answers
  # `true` (scripts/pr-touches-paths.py).
  relevant:
    name: does this change touch it
    runs-on: linux
    outputs:
      run: ${{ steps.gate.outputs.run }}
    steps:
      - uses: actions/checkout@v5
        with:
          fetch-depth: 0
      - id: gate
        run: |
          set -euo pipefail
          r=$(python3 scripts/pr-touches-paths.py .github/workflows/wai-vector.yml \
                "${{ github.event.pull_request.base.sha }}" \
                "${{ github.event.pull_request.head.sha }}")
          echo "this change touches wai-vector: $r"
          echo "run=$r" >> "$GITHUB_OUTPUT"

  native:
    needs: relevant
    if: needs.relevant.outputs.run == 'true'
    name: ${{ matrix.label }}
    runs-on: ${{ matrix.os }}
    timeout-minutes: 40
    strategy:
      fail-fast: false
      matrix:
        include:
          - { os: linux,       label: linux-x86_64 }
          - { os: linux-arm64, label: linux-aarch64 }
          - { os: macos,       label: macos-arm64 }
    steps:
      - uses: actions/checkout@v4

      # The docker images ship no Rust; the macOS host has it, but launchd's PATH omits
      # ~/.cargo/bin.
      - name: Install Rust 1.98.0
        shell: bash
        run: |
          export PATH="$HOME/.cargo/bin:$PATH"
          command -v rustup >/dev/null 2>&1 || \
            curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
          rustup toolchain install 1.98.0 --profile minimal
          rustup default 1.98.0
          echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"

      # Debug builds check every arithmetic operation for overflow, so a bound the
      # text states that the code exceeds panics here.
      - name: Every test, debug
        working-directory: wai/wai-vector
        shell: bash
        run: cargo test --locked

      - name: Every test, release
        working-directory: wai/wai-vector
        shell: bash
        run: cargo test --locked --release

      - name: The corpus regenerated, every expected file recomputed
        working-directory: wai/wai-vector
        shell: bash
        run: cargo run --locked --release --features std --bin wai-vector -- vectors verify ..

      # A sink has no stroker (graphics-vector.md §3.14): the library builds without
      # the authoring code.
      - name: The sink's build, without the feature author
        working-directory: wai/wai-vector
        shell: bash
        run: cargo build --locked --no-default-features --lib

  wasip2:
    needs: relevant
    if: needs.relevant.outputs.run == 'true'
    name: wasm32-wasip2 (wasmtime)
    runs-on: linux
    timeout-minutes: 30
    steps:
      - uses: actions/checkout@v4

      - name: Install Rust 1.98.0 with the wasm32-wasip2 target
        shell: bash
        run: |
          export PATH="$HOME/.cargo/bin:$PATH"
          command -v rustup >/dev/null 2>&1 || \
            curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
          rustup toolchain install 1.98.0 --profile minimal
          rustup default 1.98.0
          rustup target add wasm32-wasip2
          echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"

      - name: Install wasmtime 38.0.3
        shell: bash
        run: |
          set -euo pipefail
          v=38.0.3
          curl --proto '=https' --tlsv1.2 -sSfL -o "$RUNNER_TEMP/wasmtime.tar.xz" \
            "https://github.com/bytecodealliance/wasmtime/releases/download/v$v/wasmtime-v$v-x86_64-linux.tar.xz"
          tar -C "$RUNNER_TEMP" -xf "$RUNNER_TEMP/wasmtime.tar.xz"
          echo "$RUNNER_TEMP/wasmtime-v$v-x86_64-linux" >> "$GITHUB_PATH"

      # The tests read committed files through CARGO_MANIFEST_DIR/.., so the wai
      # directory is preopened at its own absolute path.
      - name: Every test, under WASI
        working-directory: wai/wai-vector
        shell: bash
        run: |
          set -euo pipefail
          W=$(cd .. && pwd)
          CARGO_TARGET_WASM32_WASIP2_RUNNER="wasmtime run --dir $W::$W" \
            cargo test --locked --release --target wasm32-wasip2

      - name: Build the tool for wasm32-wasip2
        working-directory: wai/wai-vector
        shell: bash
        run: cargo build --locked --release --features std --target wasm32-wasip2 --bin wai-vector

      - name: The corpus regenerated, every expected file recomputed, under WASI
        working-directory: wai
        shell: bash
        run: |
          set -euo pipefail
          wasmtime --version
          wasmtime run --dir .::/wai wai-vector/target/wasm32-wasip2/release/wai-vector.wasm vectors verify /wai

  node:
    needs: relevant
    if: needs.relevant.outputs.run == 'true'
    name: wasm32 under Node
    runs-on: linux
    timeout-minutes: 30
    steps:
      - uses: actions/checkout@v4

      - name: Install Rust 1.98.0 with the wasm32 target
        shell: bash
        run: |
          export PATH="$HOME/.cargo/bin:$PATH"
          command -v rustup >/dev/null 2>&1 || \
            curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
          rustup toolchain install 1.98.0 --profile minimal
          rustup default 1.98.0
          rustup target add wasm32-unknown-unknown
          echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"

      - uses: actions/setup-node@v4
        with:
          node-version: '22'

      - name: Build the recomputation for wasm32-unknown-unknown
        working-directory: wai/wai-vector/wasm
        shell: bash
        run: cargo build --locked --release --target wasm32-unknown-unknown

      - name: Every expected file and authoring form recomputed under Node
        working-directory: wai/wai-vector/wasm
        shell: bash
        run: node verify.mjs target/wasm32-unknown-unknown/release/wai_vector_wasm.wasm ../../vector-conformance

  browser:
    needs: relevant
    if: needs.relevant.outputs.run == 'true'
    name: wasm32 in three browser engines
    runs-on: linux
    timeout-minutes: 45
    # Playwright 1.60.0's own image: Node and the three engines that version drives,
    # already installed. Pinned by the digest of its linux/amd64 manifest (the linux
    # runner is x86_64), so the engines' builds cannot move under the tag.
    container:
      image: mcr.microsoft.com/playwright:v1.60.0-noble@sha256:83192064c7510f7ee73dd63dc5f22a5e01a92c81a2e6a9c715d9e3fe55471fd9
    env:
      # The image runs as root, and an engine that finds HOME owned by another user
      # refuses to start.
      HOME: /root
    steps:
      - uses: actions/checkout@v4

      # The image ships no Rust. wasm32v1-none is the package's target: its
      # precompiled core and alloc are WebAssembly 1.0, which those of
      # wasm32-unknown-unknown are not (wasm/build-pkg.sh says why that decides it).
      - name: Install Rust 1.98.0 with the wasm32v1-none and wasm32-unknown-unknown targets
        shell: bash
        run: |
          export PATH="$HOME/.cargo/bin:$PATH"
          command -v rustup >/dev/null 2>&1 || \
            curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
          rustup toolchain install 1.98.0 --profile minimal
          rustup default 1.98.0
          rustup target add wasm32v1-none wasm32-unknown-unknown
          echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"

      # The sink's exports alone, built and then read back: every section, type,
      # segment and instruction WebAssembly 1.0's, no imports, no 64-bit integer at an
      # exported function, no floating point, and the exported functions the script
      # lists. The build fails otherwise.
      - name: The package, built for wasm32v1-none and read back as WebAssembly 1.0
        shell: bash
        run: bash wai/wai-vector/wasm/build-pkg.sh

      - name: Build the recomputation for wasm32-unknown-unknown
        working-directory: wai/wai-vector/wasm
        shell: bash
        run: cargo build --locked --release --target wasm32-unknown-unknown

      # The check must be able to fail. The recomputation module is the default
      # target's build, whose precompiled core and alloc use bulk memory: the reader
      # must refuse it, and for that reason.
      - name: The reader refuses a module that is not WebAssembly 1.0
        working-directory: wai/wai-vector/wasm
        shell: bash
        run: |
          set -euo pipefail
          if node check-mvp.mjs target/wasm32-unknown-unknown/release/wai_vector_wasm.wasm > "$RUNNER_TEMP/check-default.log" 2>&1; then
            cat "$RUNNER_TEMP/check-default.log"
            echo "::error::check-mvp.mjs passed the default target's build"
            exit 1
          fi
          cat "$RUNNER_TEMP/check-default.log"
          grep -q 'NOT 1.0: bulk-memory (memory.copy)' "$RUNNER_TEMP/check-default.log" \
            || { echo "::error::check-mvp.mjs did not report bulk memory in the default target's build"; exit 1; }

      # The image's engines are the ones this Playwright drives; the package comes
      # from the lockfile, with its integrity hash.
      - name: Playwright 1.60.0, from the lockfile
        working-directory: wai/wai-vector/browser
        shell: bash
        run: |
          set -euo pipefail
          node --version
          npm ci --no-audit --no-fund

      # A missing engine is a failure: run.mjs passes only when all three ran.
      - name: Every payload, frame, text record and vector in chromium, webkit and firefox
        working-directory: wai/wai-vector/browser
        shell: bash
        run: |
          set -euo pipefail
          node run.mjs --engines chromium,webkit,firefox \
            --pkg ../wasm/dist/pkg-vector \
            --recompute ../wasm/target/wasm32-unknown-unknown/release/wai_vector_wasm.wasm \
            ../../vector-conformance

  fuzz:
    needs: relevant
    if: needs.relevant.outputs.run == 'true'
    name: fuzz, peak allocation, comparison count
    runs-on: linux
    timeout-minutes: 30
    steps:
      - uses: actions/checkout@v4

      - name: Install Rust 1.98.0
        shell: bash
        run: |
          export PATH="$HOME/.cargo/bin:$PATH"
          command -v rustup >/dev/null 2>&1 || \
            curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh -s -- -y --profile minimal --default-toolchain 1.98.0
          rustup toolchain install 1.98.0 --profile minimal
          rustup default 1.98.0
          echo "$HOME/.cargo/bin" >> "$GITHUB_PATH"

      # Every corpus vector and every file under fuzz/seeds/ as a seed, 2,000
      # mutations each: no input panics, and every accepted input writes back to
      # its own bytes.
      - name: Corpus-seeded fuzz at depth
        working-directory: wai/wai-vector
        shell: bash
        env:
          WAI_VECTOR_FUZZ_ITERS: '2000'
        run: cargo test --locked --release --test fuzz_smoke -- --nocapture

      - name: Peak allocation and the duplicate-detection comparison count
        working-directory: wai/wai-vector
        shell: bash
        run: cargo test --locked --release --test peak_alloc --test canonical -- --nocapture

      - name: Every workflow declares a concurrency group
        shell: bash
        run: bash scripts/check-workflow-concurrency.sh

  checker:
    needs: relevant
    if: needs.relevant.outputs.run == 'true'
    name: independent checker (Python)
    runs-on: linux
    timeout-minutes: 30
    steps:
      - uses: actions/checkout@v4

      - uses: actions/setup-python@v5
        with:
          python-version: '3.11'

      # Standard library only, so it needs nothing installed. Every frame of every
      # rendering vector is rendered, the clock vector's 3840 x 2160 frames included.
      - name: wai_vector_check.py recomputes every expected file of the corpus
        working-directory: wai
        shell: bash
        run: python3 -I tools/wai_vector_check.py corpus vector-conformance --quiet

      - name: Every workflow declares a concurrency group
        shell: bash
        run: bash scripts/check-workflow-concurrency.sh