open-standards/wai/extensions/cue-injection.md

WAI Extension: Cue Injection

Status: Draft. Registers the record wai.live.injection: SCTE 104 automation, translated to SCTE 35 sections and signed as a room's cue events. A broadcast automation system drives its injector over the API SCTE 104 defines; here the injector is a WAI ingest gateway. It answers each request as that standard says, builds the SCTE 35 section the request asks for, derives the cue the room's ad breaks are made of (live-events §4.3, live-ads §4.3), and signs that cue, by its own principal, when the splice comes on the room clock. Before each cue its chain holds the cue's injection record, WIJ1: the SCTE 104 message whole, when it arrived, and the parameters it was translated with, so that a verifier recomputes the cue, its section and its instant from the record alone. No new transport, and nothing in the cue's layout changes: the record rides in the meta kind. The reference implementation is the scte module of joule-moq-ingest in joule-code/joule-code-rs/crates/; the corpus is live-conformance/injection/, and its second implementation is live-conformance/injection_verify.py. Keywords MUST, MUST NOT, SHOULD, MAY are RFC 2119/8174.

Texts read for this revision: ANSI/SCTE 104 2023 (its §7, §8, §9, §12, §14 and Appendix A to C); ANSI/SCTE 35-1 2023r2 (its §9.6 to §9.9, §10.2 and §10.3, and the sample messages of §14). SMPTE ST 2010, which carries SCTE 104 messages in a video signal's vertical ancillary data, and SMPTE EG 40, which SCTE 104 names for frame-time arithmetic, were not available to this revision (§5.6, §10). A section number of one of these texts is that revision's.

1. Scope

In scope: the injector's API connection and its responses (§3); the messages it takes, their checks, and when their requests are processed (§4); the SCTE 35 section each request builds (§5); the cues a request yields, and what it withdraws (§6); the injection record, the order in which an injector signs, and the rules it holds its own chain to (§7); how a verifier checks an injector's chain (§8); the reasons (§9); and the carriage of SCTE 104 in a video signal, as a mapping note (§10).

Out of scope: a transport (SCTE 104 runs over TCP, Appendix A there); the PAMS interface of SCTE 104 §10 and §11, which provisions injectors and is not an automation system's; the splicing of SCTE 35 downstream; ad decisions, which live-ads §7 makes; and the SCTE 35-2 event-based signalling a cue's form 2 carries, which no SCTE 104 request builds.

Relationship to the core spec: wai.live.injection is a record (SPEC §5): a signed record a WAI tool emits and verifies. It names no payload format and is not dispatchable. Relationship to live-events: this extension changes nothing in it. A cue is a cue event as it is, of form 1 or 0 (§4.3 there); the injection record is the payload of a meta event (§4.2 there), bound to its cue by the chain, as live-ads §4.2 binds a break annotation and timed-text binds a caption's annotation. Relationship to live-ads: an injector's cues are breaks as any other principal's are; this extension makes their timing and their SCTE 35 messages recomputable from what the automation system sent.

2. Terms

• Automation system (AS), injector, API connection, request, response: SCTE 104's terms (§5.2 and §8.1 there). An injector here is a gateway with a principal of the room and a grant that permits cue and meta (live-rooms §4.1).
• Message: one multiple_operation_message() (SCTE 104 §8.2.3), or one single_operation_message() (§8.2.2).
• Normal request, Supplemental request: as SCTE 104 §8.3.1 classes the requests of its Table 8-4. A group is a Normal request and the Supplemental requests after it.
• Room clock, principal, chain, cue: as in live-events §2 and §4.3. A cue's type is out (1), in (2), chapter (3) or break (4).
• Splice instant: the room-clock instant, µs, a request's splice is for (§5.3, §5.4).
• Translation: the function of §4 to §6 from a message, the instant it arrived and the parameters (§4.2) to its requests' sections, cues and withdrawals.

Integers of the SCTE 104 and SCTE 35 bit streams are big-endian, as those standards write them; integers of the injection record are little-endian, as live-events' are. A digest is SHA-256 (FIPS 180-4).

3. The API connection

An injector listens for API connections on TCP, at port 5167 unless it is configured otherwise (SCTE 104 §9.1, Appendix A). Each message on a connection begins with its opID, or 0xFFFF, and its messageSize, the size of the whole message: a reader takes four bytes, then the rest of messageSize.

• Initialisation. The first message of a connection is an init_request. The injector answers it with an init_response, result 100 (Successful Response), protocol version 0. While another connection holds the injector initialised and open, an init_request is answered result 110 (Injector is already in use), and the injector takes nothing more from it. A multiple_operation_message() that arrives before init_request is answered with an inject_response of result 124 (not_initialized).
• Alive. An alive_request on an initialised connection is answered with an alive_response, result 100, carrying the injector's time() (SCTE 104 §12.4: seconds since 1980-01-06T00:00:00Z with the leap seconds of §4.2 counted, and µs); on another, result 124.
• Requests. A multiple_operation_message() is answered with one inject_response (SCTE 104 §9.6.2): its message_number, and the result of §4 to §7: 100, 122 where §5.3 issues a splice whose pre-roll was too small, or the result code of the refusal (§9). Every response echoes the request's AS_index, message_number and DPI_PID_index, with protocol_version 0 and result_extension 0xFFFF but where §4.3 names the opID at fault.
• Completion. When the last cue a message yields has been signed or dropped (§7.3), and at least one was signed, the injector sends one inject_complete_response (SCTE 104 §9.6.3) whose cue_message_count is the number of cues signed for it. A message that yields no cue is completed by its inject_response alone, as SCTE 104 §9.6.3 has a Normal request that issues no section completed.
• Order. A request's inject_response precedes its inject_complete_response.
• Others. A general_response and the user-defined opIDs 0x0005 and 0x0006 are not answered. Another single_operation_message() opID is answered with a general_response of result 125 whose result_extension is the opID.
• DPI_PID_index. An injector configured with the values it serves answers a message of another value result 126 (dpi_pid_unknown).

4. Requests

4.1 The message

A multiple_operation_message() (SCTE 104 Table 8-2) is read in its order, and refused at the first of these that holds:

1. Reserved is not 0xFFFF: it is a single_operation_message() (§3).
2. messageSize is not the message's size, a field runs past the message, or bytes follow its last request: message_size (114).
3. protocol_version or SCTE35_protocol_version is not 0: version_unsupported (127).
4. timestamp()'s time_type is not 0 or 1: time_type_unsupported (123). A time_type 1 whose instant precedes the room's t0 is timestamp_before_room (115).
5. num_ops is 0: no_operation (115).
6. The requests do not group (§4.3): supplemental_first (115), operation_unsupported (124) or opid_unknown (125).
7. A request's data does not read as §5 reads it, or holds a value §5 does not allow: the reason §5 names.
8. The message yields more than 255 cues: too_many_cues (115).

A message refused yields nothing: no section, no cue, no withdrawal.

4.2 When its requests are processed

The processing instant P of a message, on the room clock, is:

• time_type 0: the instant its last byte arrived, R (SCTE 104 §8.2.3.4: "all Normal request timing is relative to the arrival time of the last byte of the message");
• time_type 1: the UTC instant its UTC_seconds and UTC_microseconds state, less the room's t0; where that instant has passed when the message arrives, R. UTC_seconds counts from 1980-01-06T00:00:00Z with the intervening leap seconds included (§12.5.1), so its Unix instant is (UTC_seconds + 315 964 800 − leap) s, where leap is the leap seconds the injector is configured with (18 since 2017-01-01); UTC_microseconds holds the most significant 16 bits of the µs, so its µs are the field shifted left by 8.

A VITC timestamp (time_type 2) and a GPI (3) need a video signal's time code and a contact closure, which a gateway that takes compressed contribution does not have; they are refused (§4.1 step 4).

The parameters of a translation are the room's t0, leap, and the frame rate fps_num/fps_den that §5.6's duration_extension_frames is counted in.

4.3 Groups

The requests of a message, in order, form groups (SCTE 104 §8.2.3.1, §8.3.1):

• a Normal request this revision implements opens a group: splice_request_data() (0x0101), splice_null_request_data() (0x0102), time_signal_request_data() (0x0104);
• a Supplemental request this revision implements joins the group before it: insert_descriptor_request_data() (0x0108), insert_DTMF_descriptor_request_data() (0x0109), insert_avail_descriptor_request_data() (0x010A), insert_segmentation_descriptor_request_data() (0x010B), insert_tier_data() (0x010F), insert_time_descriptor() (0x0110); one before any Normal request is supplemental_first;
• a request SCTE 104 defines and this revision does not implement (§4.4) is operation_unsupported, and its opID is the response's result_extension;
• any other opID, reserved or user-defined, is opid_unknown, its opID the result_extension.

4.4 What this revision does not implement

inject_section_data_request() (0x0100) carries a command image whose pts_time the automation system computed on a clock of its own; the injector's program clock is the room clock (§5.2), so the image's times cannot be held to its cue. proprietary_command_request (0x010C) has no cue. Encryption (0x0107, 0x0300, 0x0301), component mode (0x0106, deprecated by SCTE 35-1), schedules (0x0103, 0x0105, 0x010D, 0x010E), audio descriptors and provisioning (0x0111, 0x0112) and the alternate break duration (0x0113) are not implemented. Each is refused operation_unsupported (124).

5. Sections

5.1 The section

Each group builds one splice_info_section() (SCTE 35-1 Table 5), but a splice_cancel, which builds none (§5.3):

field	value
table_id	0xFC
section_syntax_indicator, private_indicator	0, 0
sap_type	3: not specified (SCTE 104 states no stream access point)
section_length	the bytes after it, at most 4 093; past that, section_too_long (115)
protocol_version	0
encrypted_packet, encryption_algorithm, pts_adjustment	0, 0, 0
cw_index	0xFF: present and undefined in the clear (§9.6.1), as §14's samples write it
tier	the group's insert_tier_data(), or 0xFFF without one (SCTE 104 §8.2.3)
splice_command_length	the command's length
splice_command_type and the command	§5.3 to §5.5
descriptor_loop_length, the descriptors	§5.6, in the order of the group's requests
alignment_stuffing	none
CRC_32	the MPEG-2 CRC (ISO/IEC 13818-1 Annex A: polynomial 0x04C11DB7, register preset to all ones, no reflection, no final inversion) over every byte before it

Every reserved bit is 1 (SCTE 35-1's definition of reserved). A field of 1 bit that SCTE 104 carries in a byte (a flag) is 0 or 1; another value is field_range (115).

5.2 The program clock

The program's 90 kHz clock is the room clock: a splice instant S µs is pts_time ⌊S · 9 / 100⌋ modulo 2^33, with pts_adjustment 0. A device that restamps the program's times adds its delta to pts_adjustment, as SCTE 35-1 §9.6.1 has it, and the cue's t stays the instant on the room clock.

5.3 splice_request_data() to splice_insert()

splice_request_data() (SCTE 104 Table 9-5) is 14 bytes, or 15 with not_an_entry_flag; another length is message_size. Its splice_insert_type gives the command (Table 9-7 there), splice_event_cancel_indicator 0:

splice_insert_type	out_of_network_indicator	splice_immediate_flag	break_duration()	splice instant S
1 spliceStart_normal	1	1 where pre_roll_time is 0, else 0	where break_duration is not 0	P + pre_roll_time ms
2 spliceStart_immediate	1	1	where break_duration is not 0	P
3 spliceEnd_normal	0	1 where pre_roll_time is 0, else 0	none	P + pre_roll_time ms
4 spliceEnd_immediate	0	1	none	P
5 splice_cancel	—	—	—	—

• splice_event_id, unique_program_id, avail_num and avails_expected are copied; program_splice_flag is 1; event_id_compliance_flag is 1, since the injector is not told whether the automation system's ids keep SCTE 35-1 §9.9.3.
• splice_time() (Table 14 there), where the immediate flag is 0: time_specified_flag 1, pts_time §5.2's of S.
• break_duration() (Table 15 there): auto_return 1 where auto_return_flag is not 0, duration break_duration × 9 000 ticks (tenths of seconds).
• not_an_entry_flag is not passed (SCTE 104 §9.3.1.1).
• A spliceStart_normal whose pre_roll_time is not 0 and is below 4 000 ms (SCTE 104 §12.3) is issued, and answered 122 (preroll_too_small).
• splice_cancel builds no section and yields no cue: it withdraws (§6.3). The automation system sends it before the splice it cancels (SCTE 104 §9.3.1.2); §7.3 says what the injector does with one that comes later.
• A splice_insert_type of 0 or above 5 is splice_type (121).

5.4 time_signal_request_data() to time_signal()

Two bytes, pre-roll_time; another length is message_size. The command is time_signal() with splice_time() of S = P + pre-roll_time ms, time_specified_flag 1.

5.5 splice_null_request_data() to splice_null()

No data; data is message_size. The command is splice_null(), empty, and S is P.

5.6 Descriptors

Each Supplemental request adds what follows to its group's section, in the order of the requests:

• insert_avail_descriptor_request_data(): num_provider_avails, then that many provider_avail_ids (a length of 1 + 4 × the count, or message_size); one avail_descriptor() (tag 0x00, length 8, CUEI, the id) per id, none for a count of 0.
• insert_DTMF_descriptor_request_data(): pre-roll, dtmf_length (at most 7, the descriptor's three-bit dtmf_count, or field_range), the characters (a length of 2 + dtmf_length, or message_size); a DTMF_descriptor() (tag 0x01, CUEI, preroll, dtmf_count and five reserved bits, the characters).
• insert_time_descriptor(): 12 bytes, or message_size; a time_descriptor() (tag 0x03, length 16, CUEI, TAI_seconds, TAI_ns, UTC_offset).
• insert_descriptor_request_data(): descriptor_count, then that many descriptor images, each a tag, a length and that many bytes, filling the request exactly (or message_size); each copied whole. An image whose tag is one SCTE 35-1 defines (0x00 to 0x04) and whose identifier is CUEI is descriptor_image_standard (115): SCTE 104 §9.8.5.1 has a standard descriptor come through its own request, and the injector derives cues from what such a request states, never from an image.
• insert_tier_data(): two bytes whose high nibble is 0 (or field_range), the section's tier; a second in one group is field_range.
• insert_segmentation_descriptor_request_data() (SCTE 104 Table 9-29): read through segments_expected; then one of four tails, by the bytes that remain: none; 1 (duration_extension_frames); 6 (it, and delivery_not_restricted_flag, web_delivery_allowed_flag, no_regional_blackout_flag, archive_allowed_flag, device_restrictions); or 9 (those, and insert_sub_segment_info, sub_segment_num, sub_segments_expected); another is message_size. Without the delivery fields, delivery_not_restricted_flag is 1. device_restrictions above 3 is field_range. Its segmentation_descriptor() (SCTE 35-1 Table 20): tag 0x02, CUEI, segmentation_event_id; then, where segmentation_event_cancel_indicator is 1, that bit, segmentation_event_id_compliance_indicator 1 and six reserved bits, and nothing more; otherwise the cancel bit 0, the compliance bit 1, six reserved bits, program_segmentation_flag 1, segmentation_duration_flag where duration is not 0, delivery_not_restricted_flag and, where it is 0, the four restriction fields (where it is 1, five reserved bits), segmentation_duration (40 bits) where flagged, segmentation_upid_type, segmentation_upid_length and the UPID, segmentation_type_id, segment_num, segments_expected, and, where insert_sub_segment_info is 1, sub_segment_num and sub_segments_expected, which SCTE 35-1 allows only for the types 0x30, 0x32, 0x34, 0x36, 0x38, 0x3A, 0x44 and 0x46 (field_range for another). A descriptor longer than 254 bytes after its length is descriptor_too_long (115). Duration. segmentation_duration is duration × 90 000 ticks plus ⌊duration_extension_frames × 90 000 × fps_den / fps_num⌋: SCTE 104 §9.8.7.1 counts the extension in frame times, and this revision computes the frame time exactly from the configured rate where SCTE 104 refers the arithmetic to SMPTE EG 40, which it did not read.

5.7 The standard's samples

Built by §5, the request whose fields are those of SCTE 35-1 §14.1's sample (a time_signal() with a Provider Placement Opportunity Start of 307 s) gives that sample's section byte for byte, its CRC included, at the instant whose pts_time is the sample's; the corpus holds it. §14.2's splice_insert() sample is written byte for byte by the reference's section writer from its fields, but no splice_request_data() states its break_duration, which is not a whole number of tenths of a second.

6. Cues

6.1 From a splice_insert()

• spliceStart_normal and spliceStart_immediate: an out (1) at S, cue_id splice_event_id, duration_ms break_duration × 100 (0 without one), form 1 with the section. Where auto_return_flag is not 0 and break_duration is not 0, a second cue follows it, a derived in (2) at S + break_duration × 100 000 µs, the same cue_id and duration_ms, form 0: SCTE 35's auto_return has the splicer return without a message, and the derived in states that return on the room clock. live-ads §4.3 then finds the break's duration equal to its in's duration_ms.
• spliceEnd_normal and spliceEnd_immediate: an in (2) at S, cue_id splice_event_id, duration_ms 0 (the duration is the room's to compute, live-ads §4.3), form 1. It withdraws the derived in of its cue_id (§6.3): an early return ends the break where the automation system says.
• splice_cancel: no cue (§6.3).

6.2 From a time_signal()

Each segmentation request of the group that is not cancelled yields a cue at S, cue_id segmentation_event_id, form 1 with the section, by its segmentation_type_id (SCTE 35-1 Table 23):

segmentation_type_id	cue	duration_ms
0x22 Break Start; 0x30, 0x32 Provider and Distributor Advertisement Start; 0x34, 0x36 Provider and Distributor Placement Opportunity Start	out (1)	⌊segmentation_duration / 90⌋, 0 without one
0x23, 0x31, 0x33, 0x35, 0x37: their Ends	in (2)	0
0x20 Chapter Start	chapter (3)	as for an out
any other	none	—

An overlay or promotional opportunity does not replace the program, and an ad block holds the placements that do, so neither is a break; a content, program or network boundary is not one either. The cues of one group are its ins, then its outs, then its chapters, each in the order of its requests: a section that ends one break and opens the next closes the first before it opens the second. A cancelled segmentation request withdraws (§6.3). A splice_null() yields no cue, nor do the segmentation descriptors of a splice_insert(), whose cue is §6.1's.

6.3 Withdrawals

A splice_cancel withdraws the held cues (§7.3) of its splice_event_id that a splice request yielded; a cancelled segmentation request, those of its segmentation_event_id that a time signal yielded; a splice end, the held derived in of its splice_event_id.

6.4 The cue and its index

A cue is live-events §4.3's payload: type, cue_id (u32), duration_ms (u32), form, and, for form 1, scte_len (u16) and the section. A message's cues, over its groups in order and within each in §6.1's and §6.2's order, form one list; a cue's index is its position in it, from 0.

7. The injection record and the injector's chain

7.1 Layout

The injection record is the payload of a meta event (live-events §4.2):

offset	size	field	meaning
0	4	magic	WIJ1 (ASCII)
4	1	version	1 in this revision
5	8	received	u64: the room-clock instant, µs, the message's last byte arrived (R, §4.2)
13	1	leap	the leap seconds of the translation (§4.2)
14	4	fps_num	u32
18	4	fps_den	u32, neither 0
22	1	index	the index of the cue that follows (§6.4)
23	2	message_len	u16
25	message_len	message	the multiple_operation_message(), verbatim

The record holds nothing after message. The room's t0, the last parameter, is the room descriptor's.

7.2 Signing

An injector signs each cue when the room clock reaches its splice instant, never before: a withdrawal that comes in time then leaves nothing to undo in a signed chain. Among the cues due at once it signs in order of instant, then of the arrival of their messages, then of index. Each cue is two events of the injector's chain, at consecutive seq: its injection record (a meta event), then the cue, both with t the cue's splice instant. An injector takes a message's arrival instant after every instant it has signed at, so the t of its chain never decreases (live-events §6.2).

A cue is signed as it was translated. The record and the cue together are at most the principal's max_payload each (live-events §5); a message whose record or cue would pass it is refused injection_too_large (115).

7.3 The injector's rules

An injector holds each cue a message yields until its splice instant, and keeps, for its own chain, the room's breaks as live-ads §4.3 makes them: the open break, if any, and the end of the last closed one. When a message is taken:

1. A message whose message_number is that of a message with cues still held is a repeat (SCTE 104 §9.3: "the Injector can detect that these are duplicates of one another by comparison of the message_number fields"); it is answered and changes nothing (repeated_message, counted).
2. Its withdrawals (§6.3) remove held cues. A splice_cancel or a cancelled segmentation request that removes none came too late, its splice already signed or never made: it is answered 121 (cancel_too_late).
3. Its cues are held. An injector holds at most its configured number of cues (256 by default); a message whose cues would pass it is answered 124 and changes nothing.

When a held cue's splice instant comes, in the order of §7.2, it is signed unless live-ads §4.3 would refuse it in the injector's chain, in which case it is dropped and counted: an out while a break is open, or before the end of the last closed one (break_overlap); an in with no open break of its cue_id (cue_in_unmatched), or less than a millisecond after its out (break_zero_duration). A chapter is always signed. A room with other cue authors orders its cues by the merged order (live-rooms §9.2), which an injector does not see; it holds only its own chain to these rules.

7.4 Carriage

The injector publishes its events on its principal's events track (live-rooms §6.1; live-events §8.1), from its start, so a member can subscribe before the first cue. Each group's first object is the join set of live-events §8.2: the out of the break open when the group began, if one is. A relay whose door checks receipts (jwp-receipts §4.1) names the room's media kinds in its rules, since an events track carries none.

8. Verification

A verifier of an injector's chain verifies each event as live-events §6 does (its signature, bad_signature; its link, chain_broken). Then, in seq order, it refuses at the first of these that holds:

1. A meta event whose payload begins WIJ1 is an injection record: refused injection_malformed where it is shorter than 25 bytes, its version is not 1, a frame-rate field is 0, or message_len does not end it.
2. Its message is translated (§4 to §6) with received, leap, fps_num, fps_den and the room's t0: refused injection_untranslatable where the translation refuses it.
3. The next event of the chain is a cue: otherwise the record is refused injection_unanswered.
4. That cue's payload is the payload of the translation's cue index, and its t and the record's t are that cue's instant: otherwise the cue is refused injection_mismatch (an index past the translation's cues among them).
5. A cue of an injector's chain that does not follow its injection record is refused injection_missing. A verifier is told which principals are injectors: the room's configuration names them, and a cue of another principal is not held to this section.

A chain that verifies states, for each of its cues, the SCTE 104 message it came from and the instant that message arrived, and the cue is that message's translation: a reader recomputes the section a splicer acted on, the instant it splices at, and the break live-ads §4.3 makes of it.

9. Reasons

Each refusal of a message with the SCTE 104 result code (Table 14-1 there) its response carries, and each refusal of §8.

reason	result	raised at
not_initialized	124	§3, a request before init_request
injector_in_use	110	§3, an init_request while another connection holds the injector
dpi_pid_unknown	126	§3
message_size	114	§4.1 step 2; §5.3 to §5.6
version_unsupported	127	§4.1 step 3
time_type_unsupported	123	§4.1 step 4
timestamp_before_room	115	§4.1 step 4
no_operation	115	§4.1 step 5
supplemental_first	115	§4.3
operation_unsupported	124	§4.3, §4.4
opid_unknown	125	§4.3; §3, a single_operation_message() of another opID
too_many_cues	115	§4.1 step 8
splice_type	121	§5.3
preroll_too_small	122	§5.3: issued, and answered so
field_range	115	§5.1, §5.6
descriptor_image_standard	115	§5.6
descriptor_too_long	115	§5.6
section_too_long	115	§5.1
injection_too_large	115	§7.2
repeated_message	100	§7.3 step 1: counted, not refused
cancel_too_late	121	§7.3 step 2
break_overlap	—	§7.3: a held cue dropped
cue_in_unmatched	—	§7.3: a held cue dropped
break_zero_duration	—	§7.3: a held cue dropped
injection_malformed	—	§8 step 1
injection_untranslatable	—	§8 step 2
injection_unanswered	—	§8 step 3
injection_mismatch	—	§8 step 4
injection_missing	—	§8 step 5
bad_signature, chain_broken	—	§8, live-events §6

10. Carriage in a video signal (mapping)

SCTE 104 §7.2 carries the same messages within a serial digital video signal's vertical ancillary data, by SMPTE ST 2010, and SCTE 104 Appendix C has a receiving injector process each message and remove it from the video. This revision maps that carriage and implements none of it:

• Where it meets this injector. A contribution that keeps the ancillary data of its source carries ST 2010's packets beside the compressed video; an ingest path that reads them hands each message it reassembles to §4 as an API connection would, with R the room-clock time of the video frame whose ancillary data completed it, which live-ingest §7 maps. The Enhanced RTMP and WHIP ingests of live-ingest carry compressed video alone, so none of their paths has ST 2010 data to read.
• One-way carriage. In a video signal no response returns (SCTE 104 §7.4, §13.1): the injector answers nothing, and a message the automation system repeats for safety is a repeat of §7.3 step 1.
• Deferred processing. SCTE 104 §7.5 has a proxy device replace a message's timestamp() with a time_type of 0 when it places the message in the video at its triggering frame; such a message is processed at R (§4.2).
• What is not read. ST 2010's packet layout, its fragmentation of a message across packets, and its interaction with SMPTE ST 2038's carriage of ancillary data in an MPEG transport stream were not available to this revision.

11. Status and conformance

part	status	where
the API connection (§3)	implemented	joule-moq-ingest scte: init, alive, one connection at a time, responses and completions
translation (§4 to §6)	implemented	scte::scte104, scte::scte35
the injection record, signing, the rules (§7)	implemented	scte::Engine, scte::Injector
verification (§8)	implemented	injection_verify.py; the reference's tests
carriage in a video signal (§10)	specified	—

The corpus (live-conformance/injection/) is generated through the reference's own code paths from fixed seeds and regenerates byte for byte (tests/conformance_corpus.rs): translations of every request and descriptor this revision implements, the standard's sample (§5.7) among them; every refusal of §4 and §5 with its result code; scenarios of messages on a clock with the chain the injector signs for them, the breaks live-ads §4.3 makes of it, and what was dropped; and chains §8 refuses, each at its event with its reason. injection_verify.py, written from this text and sharing no code with the reference, translates every message, runs §7.3 over every scenario, verifies every chain and derives its breaks, and agrees with the corpus on every vector. The reference's end-to-end test (tests/scte104_injection.rs) drives an injector over TCP with an automation system of its own, and a subscriber at a relay reads the chain from the events track.

12. Security and privacy considerations

• An API connection has no authentication of its own (SCTE 104 relies on the facility's network). An injector listens on loopback by default; a deployment puts it on the automation network alone, or behind a TLS tunnel whose client certificate names the automation system.
• The injector signs what the automation system asked for, with its own key: its chain is the injector's statement of what it was sent and when, not the automation system's, which signs nothing. A reader that trusts an injector's cues trusts that key, as a reader of an ingest's receipts trusts the first hop's (live-ingest §18).
• Signing at the splice instant means a cancelled splice leaves no event, and a reader of the chain sees only the splices that happened. The cost is notice: a player learns of a break when it begins, not at the automation system's pre-roll.
• A message's bytes are untrusted data: every field is bounded by the message's size and read only as §4 to §6 read it, and a descriptor image is copied, never interpreted.